Home >> Product >> Explosion-proof lighting >> Explosion-Proof Light Fittings for Fluorescent Lamps

Flame-proof/Explosion-proof Fluorescent Lamps with Die-cast Aluminum Alloy Enclosure Model Number:Explosion-proof fluorescent lamp-1 Key Specifications/Special Features: Features: Die-cast aluminum alloy enclosure with surface plastic sprayed light configuration When changing lamp tube, should screw down the cover to change it, chain is setted on the shell Put one down when maintaining Easy to change Conduit wiring or cable wiring Technical parameters: Ex-mark: Exd IIB T6 Protection grade: IP54 Cable's outside diameter: 8 to 10mm Inlet's thread: 1/2-inch Rated power: 20, 30, 40, 60 and 80W Rated voltage: 220V Applications: Can be used in Zone 1 and Zone 2 dangerous place Can be used in IIAIIB group explosive atmosphere Suitable for light sources (general BI-PIN lamp tube): 2 x 40W 1 x 40W 2 x 30W 1 x 30W 2 x 20W 1 x 20W GB3836-2000 and IEC60079 standards     Full plastic explosion-proof fluorescent light, corrosion-proof fluorescent light Application Scope 1, Hazardous explosive gas mixtures: Zone 1, Zone 2. 2, Explosive gas mixtures IIA, IIB, IIC. 3, Temperature groups:T1~T4. 4, Ex mark: Exed IICT4.

Characteristic:

1 , Glass fiber reinforced unsaturated polyester resin molding shell.
2 , Transparent polycarbonate shade.
3 , Shell to increase security structure, with high strength, impact resistance, waterproof, dustproof, anti-corrosion, anti-static, etc..
4 ,Ballast, switches, anti-explosive components used.
5 , Containing single lamp, fast transient start.
6 , According to user requirements can be equipped with emergency equipment.
7 , Cable or steel tube wiring places.

Parameter :

Dimension & Instal l :

(BAY51)Full Plastic Explosion-Proof Fluorescent Light

Product Description

Full plastic explosion-proof fluorescent lamps comprise bodies manufactured in glass fiber reinforced polyester and transparent parts manufactured in polycarbonate. They have good protection ability from various chemical matters in factories because of high stability and mechanical strength. The material this lamp used can prevent from being corroded effectively.
The sealing bars between the bodies and transparent parts are compacted by inter lock devices. The degree of protection can be up to IP66. The isolation switches are operated by the inter lock devices. When the isolation switches are broken, the covers can be opened. Full plastic explosion-proof fluorescent lamps are used for illuminating in the circuits of AC220V, 50Hz.
Features:
1) Full plastic explosion-proof fluorescent lamp:
A) House a electric ballast, an isolation switch, a two-pin lampholder, a reflector and terminals
B) Mounting ways: Ceiling type, pendant type, chain type, bend rod type and clamp type
2) Explosion-proof platform lamp:
A) Comprise lamp poles, change direction connector
B) The new type has the characters of wind proof, waterproof
C) The change direction knots are fitted to the lamp poles so as to mount and maintain conveniently
D) Mounting ways: Fence type, flange type
3) Explosion-proof road lamp:
A) Comprise lamp poles, change direction connectors and frameworks
B) Two codes of lamp poles can be selected